- Area
- Angus and Dundee
- Postcode district
- DD10
- Nation
- Scotland
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Montrose: what to expect
Most homes can run on a heat pump if the system is designed properly, and Montrose is no different. The key is matching the heat pump and radiators to the home's heat loss.
Many homes in Montrose have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows. Terraced streets in Montrose often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
- Houses with reasonable insulation, or a plan to improve it
What's included
- MCS registration and certificate, plus network operator notification
- Outdoor unit, hot water cylinder and weather compensation controls
- Free home survey and room-by-room heat loss calculation
- Commissioning, handover and a walk-through of the controls
- System design, unit sizing and a written quote
For older properties in Montrose, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Montrose home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for air source heat pump installation in Montrose
Guide prices for Montrose and the rest of Angus and Dundee are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Winter daylight and heating in Montrose
On the shortest day Montrose gets only about 6 hours 47 minutes of daylight, with the sun around 10° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
The steps for air source heat pump installation in Montrose
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Montrose home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Montrose: questions
How soon can you survey a home in Montrose?
Survey dates depend on how busy installers are in Angus and Dundee. We offer the next available dates when you enquire and confirm them in writing.
How long does installation take in Montrose?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Montrose home states the expected time.
How long does a heat pump survey take in Montrose?
A home survey in Montrose usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.