- Area
- Cambridgeshire
- Postcode district
- PE1
- Nation
- England
- Guide price
- From £9,700 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Peterborough
Every property in Peterborough is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
In Peterborough, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Installers working in Peterborough plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Households with room for a hot water cylinder
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- Removal of the old boiler or heaters
- Free home survey and room-by-room heat loss calculation
- Radiator and pipework changes where the design needs them
- System design, unit sizing and a written quote
Terraced streets in Peterborough often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Peterborough quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Peterborough
Guide prices for Peterborough and the rest of Cambridgeshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,700–£12,750 | £2,200–£5,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,700–£13,750 | £3,200–£6,250 |
| 3 bedroom semi or small detached | 6–9 kW | £12,250–£15,800 | £4,750–£8,300 |
| 4 bedroom detached | 8–12 kW | £14,300–£18,350 | £6,800–£10,850 |
| 5+ bedroom or larger older house | 11–16 kW | £16,850–£22,950 | £9,350–£15,450 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Peterborough?
Peterborough has about 7 hours 38 minutes of daylight at midwinter and 16 hours 51 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Peterborough
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Peterborough home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Peterborough: questions
What size heat pump does a Peterborough home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Peterborough home.
Do I need new radiators for a heat pump in Peterborough?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Peterborough home gives a room-by-room list.
Do you cover Whittlesey as well as Peterborough?
Yes. We arrange surveys and installation in Whittlesey, which is about 5 miles east of Peterborough, and across Cambridgeshire.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.