- Area
- Derbyshire
- Postcode district
- DE6
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Ashbourne
The question for an Ashbourne home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Terraced streets in Ashbourne often mean a compact unit position at the rear, so siting and sound levels are checked carefully. Homeowners across Derbyshire can arrange a survey in Ashbourne for a room-by-room design and a written quote before committing to anything.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
What's included
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
- Free home survey and room-by-room heat loss calculation
- Radiator and pipework changes where the design needs them
- System design, unit sizing and a written quote
For older properties in Ashbourne, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in England
Homes in Ashbourne can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation prices in Ashbourne
Here are typical prices for air source heat pump installation in Derbyshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Ashbourne's winters
On the shortest day Ashbourne gets about 7 hours 33 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Ashbourne
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Ashbourne; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Ashbourne: questions
Do you cover Belper as well as Ashbourne?
Yes. We arrange surveys and installation in Belper, which is about 10 miles east of Ashbourne, and across Derbyshire.
Can you service a heat pump in Ashbourne that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Ashbourne, whoever fitted them. Tell us the make and model when you book.
How long does installation take in Ashbourne?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Ashbourne home states the expected time.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.