- Area
- Dyfed
- Postcode district
- SA48
- Nation
- Wales
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Lampeter homes
Every property in Lampeter is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Terraced streets in Lampeter often mean a compact unit position at the rear, so siting and sound levels are checked carefully. Many homes in Lampeter have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Houses with reasonable insulation, or a plan to improve it
- Households with room for a hot water cylinder
What's included
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
- System design, unit sizing and a written quote
- MCS registration and certificate, plus network operator notification
- Free home survey and room-by-room heat loss calculation
In Lampeter, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
Grants and rules for heat pumps in Wales
In Wales the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027; £2,500 for air-to-air). The MCS-certified installer named in your quote applies to Ofgem for you, and the grant comes off your Lampeter quote.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
Guide prices for air source heat pump installation in Lampeter
The ranges below are typical installed prices for homes in Dyfed, including VAT. A survey sets the exact figure, because two similar-looking houses in Lampeter can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Lampeter and what they mean
Lampeter has about 7 hours 43 minutes of daylight at midwinter and 16 hours 45 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Lampeter
- Start online with a guide price or call us.
- A home survey in Lampeter gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Lampeter: questions
What size heat pump does a Lampeter home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Lampeter home.
Do you cover Carmarthen as well as Lampeter?
Yes. We arrange surveys and installation in Carmarthen, which is about 20 miles south-west of Lampeter, and across Dyfed.
Where would the outdoor unit go on a Lampeter house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Lampeter home.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.