- Area
- Essex
- Postcode district
- CM9
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Maldon
Homes around Maldon range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
In Maldon, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Terraced streets in Maldon often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- Free home survey and room-by-room heat loss calculation
- Commissioning, handover and a walk-through of the controls
- MCS registration and certificate, plus network operator notification
- Removal of the old boiler or heaters
- Boiler Upgrade Scheme application in England and Wales where eligible
For older properties in Maldon, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Maldon quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Maldon
The ranges below are typical installed prices for homes in Essex, including VAT. A survey sets the exact figure, because two similar-looking houses in Maldon can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Maldon and what they mean
On the shortest day Maldon gets about 7 hours 47 minutes of daylight, with the noon sun around 15° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Maldon
- Start online with a guide price or call us.
- A home survey in Maldon gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Maldon: questions
How long does installation take in Maldon?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Maldon home states the expected time.
What size heat pump does a Maldon home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Maldon home.
Do you cover Witham as well as Maldon?
Yes. We arrange surveys and installation in Witham, which is about 5 miles north of Maldon, and across Essex.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.