- Area
- Greater London
- Postcode district
- SW13
- Nation
- England
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Barnes
In Barnes, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Homeowners across Greater London can arrange a survey in Barnes for a room-by-room design and a written quote before committing to anything. Many homes in Barnes have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- Free home survey and room-by-room heat loss calculation
- Outdoor unit, hot water cylinder and weather compensation controls
- Radiator and pipework changes where the design needs them
- MCS registration and certificate, plus network operator notification
For older properties in Barnes, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Barnes quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Barnes
These are guide prices for Greater London, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Barnes's winters
Barnes sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 38 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
The steps for air source heat pump installation in Barnes
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Barnes; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Barnes: questions
Can you service a heat pump in Barnes that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Barnes, whoever fitted them. Tell us the make and model when you book.
What size heat pump does a Barnes home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Barnes home.
Do I need new radiators for a heat pump in Barnes?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Barnes home gives a room-by-room list.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.