- Area
- Hertfordshire
- Postcode district
- WD7
- Nation
- England
- Guide price
- From £10,000 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Radlett: what to expect
Homes around Radlett range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Terraced streets in Radlett often mean a compact unit position at the rear, so siting and sound levels are checked carefully. Installers working in Radlett plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- System design, unit sizing and a written quote
- Commissioning, handover and a walk-through of the controls
- Radiator and pipework changes where the design needs them
- Removal of the old boiler or heaters
- Free home survey and room-by-room heat loss calculation
Homeowners across Hertfordshire can arrange a survey in Radlett for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Radlett quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Radlett
Here are typical prices for air source heat pump installation in Hertfordshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,000–£13,150 | £2,500–£5,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,050–£14,200 | £3,550–£6,700 |
| 3 bedroom semi or small detached | 6–9 kW | £12,600–£16,300 | £5,100–£8,800 |
| 4 bedroom detached | 8–12 kW | £14,700–£18,900 | £7,200–£11,400 |
| 5+ bedroom or larger older house | 11–16 kW | £17,350–£23,650 | £9,850–£16,150 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Radlett's winters
Radlett has about 7 hours 48 minutes of daylight at midwinter and 16 hours 40 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Radlett
- Start online with a guide price or call us.
- A home survey in Radlett gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Radlett: questions
Do I need new radiators for a heat pump in Radlett?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Radlett home gives a room-by-room list.
Do you cover St Albans as well as Radlett?
Yes. We arrange surveys and installation in St Albans, which is about 4 miles north of Radlett, and across Hertfordshire.
What size heat pump does a Radlett home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Radlett home.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.