- Area
- Highlands and Islands
- Postcode district
- IV51
- Nation
- Scotland
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
Before you book: air source heat pump installation in Portree
Most homes can run on a heat pump if the system is designed properly, and Portree is no different. The key is matching the heat pump and radiators to the home's heat loss.
For older properties in Portree, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Installers working in Portree plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
- Houses with reasonable insulation, or a plan to improve it
What's included
- Commissioning, handover and a walk-through of the controls
- Removal of the old boiler or heaters
- System design, unit sizing and a written quote
- Outdoor unit, hot water cylinder and weather compensation controls
- Free home survey and room-by-room heat loss calculation
Homeowners across the Highlands and Islands can arrange a survey in Portree for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Portree home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Portree property at survey.
Air source heat pump installation costs around Portree
Here are typical prices for air source heat pump installation in the Highlands and Islands, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Winter daylight and heating in Portree
Portree has about 6 hours 36 minutes of daylight at midwinter against 18 hours 00 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
How installation works in Portree
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Portree home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Portree is in an area we cover by arrangement, so survey dates and any travel costs are confirmed individually in your quote.
Air source heat pump installation in Portree: questions
How long does installation take in Portree?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Portree home states the expected time.
Where would the outdoor unit go on a Portree house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Portree home.
How long does a heat pump survey take in Portree?
A home survey in Portree usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.