- Area
- Kent
- Postcode district
- CT10
- Nation
- England
- Guide price
- From £9,800 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Broadstairs
A heat pump suits most Broadstairs homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Homeowners across Kent can arrange a survey in Broadstairs for a room-by-room design and a written quote before committing to anything. For older properties in Broadstairs, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- System design, unit sizing and a written quote
- MCS registration and certificate, plus network operator notification
- Commissioning, handover and a walk-through of the controls
- Boiler Upgrade Scheme application in England and Wales where eligible
- Outdoor unit, hot water cylinder and weather compensation controls
Many homes in Broadstairs have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Broadstairs quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation costs around Broadstairs
Here are typical prices for air source heat pump installation in Kent, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,800–£12,900 | £2,300–£5,400 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,800–£13,900 | £3,300–£6,400 |
| 3 bedroom semi or small detached | 6–9 kW | £12,350–£15,950 | £4,850–£8,450 |
| 4 bedroom detached | 8–12 kW | £14,400–£18,550 | £6,900–£11,050 |
| 5+ bedroom or larger older house | 11–16 kW | £17,000–£23,200 | £9,500–£15,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Broadstairs?
On the shortest day Broadstairs gets about 7 hours 51 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
What happens after you enquire in Broadstairs?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Broadstairs; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Broadstairs: questions
How soon can you survey a home in Broadstairs?
Survey dates depend on how busy installers are in Kent. We offer the next available dates when you enquire and confirm them in writing.
Do you cover Margate as well as Broadstairs?
Yes. We arrange surveys and installation in Margate, which is about 2 miles north-west of Broadstairs, and across Kent.
What size heat pump does a Broadstairs home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Broadstairs home.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.