- Area
- Lancashire
- Postcode district
- BB8
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Colne
In Colne, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Many homes in Colne have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows. For older properties in Colne, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Owners who want one contract covering design, fitting and paperwork
- Households with room for a hot water cylinder
What's included
- Commissioning, handover and a walk-through of the controls
- Outdoor unit, hot water cylinder and weather compensation controls
- System design, unit sizing and a written quote
- Boiler Upgrade Scheme application in England and Wales where eligible
- MCS registration and certificate, plus network operator notification
In Colne, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Colne quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation prices in Colne
Here are typical prices for air source heat pump installation in Lancashire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Colne's winters
On the shortest day Colne gets only about 7 hours 24 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Colne
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Colne home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Colne: questions
How long does installation take in Colne?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Colne home states the expected time.
How long does a heat pump survey take in Colne?
A home survey in Colne usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How soon can you survey a home in Colne?
Survey dates depend on how busy installers are in Lancashire. We offer the next available dates when you enquire and confirm them in writing.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.