- Area
- Lincolnshire
- Postcode district
- LN6
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Lincoln homes
The question for a Lincoln home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
For older properties in Lincoln, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. Many homes in Lincoln have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Owners who want one contract covering design, fitting and paperwork
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- Outdoor unit, hot water cylinder and weather compensation controls
- Radiator and pipework changes where the design needs them
- Commissioning, handover and a walk-through of the controls
- Removal of the old boiler or heaters
In Lincoln, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
Grants and rules for heat pumps in England
Homes in Lincoln can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for air source heat pump installation in Lincoln
The ranges below are typical installed prices for homes in Lincolnshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Lincoln can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Lincoln and what they mean
Lincoln has about 7 hours 31 minutes of daylight at midwinter and 16 hours 59 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
What happens after you enquire in Lincoln?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Lincoln home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Lincoln: questions
Do I need new radiators for a heat pump in Lincoln?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Lincoln home gives a room-by-room list.
What size heat pump does a Lincoln home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Lincoln home.
How soon can you survey a home in Lincoln?
Survey dates depend on how busy installers are in Lincolnshire. We offer the next available dates when you enquire and confirm them in writing.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.