- Area
- Merseyside
- Postcode district
- CH41
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Birkenhead: what to expect
Most homes can run on a heat pump if the system is designed properly, and Birkenhead is no different. The key is matching the heat pump and radiators to the home's heat loss.
Homeowners across Merseyside can arrange a survey in Birkenhead for a room-by-room design and a written quote before committing to anything. In Birkenhead, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Homes replacing a gas, oil, LPG or electric heating system
- Households with room for a hot water cylinder
What's included
- System design, unit sizing and a written quote
- MCS registration and certificate, plus network operator notification
- Radiator and pipework changes where the design needs them
- Removal of the old boiler or heaters
- Boiler Upgrade Scheme application in England and Wales where eligible
Terraced streets in Birkenhead often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
Grants and rules for heat pumps in England
Homes in Birkenhead can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Birkenhead
These are guide prices for Merseyside, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Birkenhead and what they mean
Birkenhead has about 7 hours 29 minutes of daylight at midwinter and 17 hours 01 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Birkenhead
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Birkenhead home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Birkenhead: questions
How long does a heat pump survey take in Birkenhead?
A home survey in Birkenhead usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do you cover Liverpool as well as Birkenhead?
Yes. We arrange surveys and installation in Liverpool, which is about 2 miles north-east of Birkenhead, and across Merseyside.
Can you service a heat pump in Birkenhead that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Birkenhead, whoever fitted them. Tell us the make and model when you book.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.