- Area
- North Yorkshire
- Postcode district
- YO22
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Whitby
A heat pump suits most Whitby homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Many homes in Whitby have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows. Homeowners across North Yorkshire can arrange a survey in Whitby for a room-by-room design and a written quote before committing to anything.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
- Homes replacing a gas, oil, LPG or electric heating system
- Owners who want one contract covering design, fitting and paperwork
What's included
- MCS registration and certificate, plus network operator notification
- Outdoor unit, hot water cylinder and weather compensation controls
- System design, unit sizing and a written quote
- Removal of the old boiler or heaters
- Commissioning, handover and a walk-through of the controls
Installers working in Whitby plan the order of work so heating and hot water are off for as short a time as practical.
Grants and rules for heat pumps in England
Homes in Whitby can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation prices in Whitby
These are guide prices for North Yorkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Whitby
Whitby sees roughly 7 hours 16 minutes of daylight in December and 17 hours 15 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
What happens after you enquire in Whitby?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Whitby home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Whitby: questions
Where would the outdoor unit go on a Whitby house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Whitby home.
What size heat pump does a Whitby home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Whitby home.
How long does installation take in Whitby?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Whitby home states the expected time.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.