- Area
- Oxfordshire
- Postcode district
- OX9
- Nation
- England
- Guide price
- From £9,900 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Thame: what to expect
Every property in Thame is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
In Thame, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Installers working in Thame plan the order of work so heating and hot water are off for as short a time as practical.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Homes replacing a gas, oil, LPG or electric heating system
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Outdoor unit, hot water cylinder and weather compensation controls
- Radiator and pipework changes where the design needs them
- Free home survey and room-by-room heat loss calculation
- System design, unit sizing and a written quote
- Commissioning, handover and a walk-through of the controls
Many homes in Thame have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Thame quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation costs around Thame
Guide prices for Thame and the rest of Oxfordshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,900–£13,000 | £2,400–£5,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,900–£14,050 | £3,400–£6,550 |
| 3 bedroom semi or small detached | 6–9 kW | £12,500–£16,100 | £5,000–£8,600 |
| 4 bedroom detached | 8–12 kW | £14,550–£18,700 | £7,050–£11,200 |
| 5+ bedroom or larger older house | 11–16 kW | £17,150–£23,400 | £9,650–£15,900 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Thame and what they mean
On the shortest day Thame gets about 7 hours 47 minutes of daylight, with the noon sun around 15° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Thame
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Thame; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Thame: questions
How soon can you survey a home in Thame?
Survey dates depend on how busy installers are in Oxfordshire. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Thame?
A home survey in Thame usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How long does installation take in Thame?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Thame home states the expected time.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.