- Area
- Perth and Kinross
- Postcode district
- PH7
- Nation
- Scotland
- Guide price
- From £9,600 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Crieff: what to expect
The question for a Crieff home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
In Crieff, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Homeowners across Perth and Kinross can arrange a survey in Crieff for a room-by-room design and a written quote before committing to anything.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Houses with reasonable insulation, or a plan to improve it
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- Removal of the old boiler or heaters
- Radiator and pipework changes where the design needs them
- Outdoor unit, hot water cylinder and weather compensation controls
- MCS registration and certificate, plus network operator notification
- Commissioning, handover and a walk-through of the controls
For older properties in Crieff, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Crieff home, apply and receive the written offer before the installation date is fixed.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for air source heat pump installation in Crieff
Here are typical prices for air source heat pump installation in Perth and Kinross, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,600–£12,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,600–£13,650 |
| 3 bedroom semi or small detached | 6–9 kW | £12,100–£15,650 |
| 4 bedroom detached | 8–12 kW | £14,150–£18,200 |
| 5+ bedroom or larger older house | 11–16 kW | £16,650–£22,750 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Short winter days in Crieff and what they mean
Crieff has about 6 hours 52 minutes of daylight at midwinter against 17 hours 43 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
From survey to switch-on in Crieff
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Crieff home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Crieff: questions
What size heat pump does a Crieff home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Crieff home.
Do I need new radiators for a heat pump in Crieff?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Crieff home gives a room-by-room list.
How soon can you survey a home in Crieff?
Survey dates depend on how busy installers are in Perth and Kinross. We offer the next available dates when you enquire and confirm them in writing.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.