Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Air source heat pump installation
Renfrewshire and Inverclyde · PA2

Air source heat pump installation in Paisley

Looking into air source heat pump installation for a home in Paisley? We look at the whole heating system — emitters, pipework, cylinder space and controls — so the heat pump can run efficiently.

Area
Renfrewshire and Inverclyde
Postcode district
PA2
Nation
Scotland
Guide price
From £9,500 inc VAT
Survey
Free for installation enquiries

Before you book: air source heat pump installation in Paisley

Every property in Paisley is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.

In Paisley, cylinder space is planned with you, often in an airing cupboard, utility room or garage. Terraced streets in Paisley often mean a compact unit position at the rear, so siting and sound levels are checked carefully.

We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.

  • Houses with reasonable insulation, or a plan to improve it
  • Owners who want one contract covering design, fitting and paperwork
  • Homes replacing a gas, oil, LPG or electric heating system

What's included

  • Free home survey and room-by-room heat loss calculation
  • Radiator and pipework changes where the design needs them
  • Commissioning, handover and a walk-through of the controls
  • Removal of the old boiler or heaters
  • Outdoor unit, hot water cylinder and weather compensation controls

Homeowners across Renfrewshire and Inverclyde can arrange a survey in Paisley for a room-by-room design and a written quote before committing to anything.

Grants and rules for heat pumps in Scotland

Scotland

The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Paisley can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.

There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.

What to budget for air source heat pump installation in Paisley

These are guide prices for Renfrewshire and Inverclyde, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.

What to budget for air source heat pump installation in Paisley
HomeTypical sizeInstalled guide price
1–2 bedroom flat or small terrace4–5 kW£9,500–£12,500
2–3 bedroom terrace or semi5–7 kW£10,500–£13,500
3 bedroom semi or small detached6–9 kW£12,000–£15,500
4 bedroom detached8–12 kW£14,000–£18,000
5+ bedroom or larger older house11–16 kW£16,500–£22,500

Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.

How long is the heating season in Paisley?

6 h 59 minDaylight on the shortest day
17 h 35 minDaylight on the longest day
11°Noon sun height in December
55.83°NLatitude of Paisley

On the shortest day Paisley gets only about 6 hours 59 minutes of daylight, with the sun around 11° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.

From survey to switch-on in Paisley

  1. Send your postcode and a few details, or use the guide price tool.
  2. A surveyor visits your Paisley home, measures every room and checks where the outdoor unit can go.
  3. You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
  4. Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
  5. The system is commissioned, set up with weather compensation and handed over with the paperwork.

Air source heat pump installation in Paisley: questions

What size heat pump does a Paisley home need?

It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Paisley home.

Do I need new radiators for a heat pump in Paisley?

Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Paisley home gives a room-by-room list.

How soon can you survey a home in Paisley?

Survey dates depend on how busy installers are in Renfrewshire and Inverclyde. We offer the next available dates when you enquire and confirm them in writing.

Do I need new radiators for a heat pump?

Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.

Will an air source heat pump be noisy?

Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote