- Area
- Rutland
- Postcode district
- LE15
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Oakham
Most homes can run on a heat pump if the system is designed properly, and Oakham is no different. The key is matching the heat pump and radiators to the home's heat loss.
In Oakham, cylinder space is planned with you, often in an airing cupboard, utility room or garage. For older properties in Oakham, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Houses with reasonable insulation, or a plan to improve it
- Households with room for a hot water cylinder
- Homes replacing a gas, oil, LPG or electric heating system
What's included
- Outdoor unit, hot water cylinder and weather compensation controls
- Boiler Upgrade Scheme application in England and Wales where eligible
- MCS registration and certificate, plus network operator notification
- System design, unit sizing and a written quote
- Radiator and pipework changes where the design needs them
Homeowners across Rutland can arrange a survey in Oakham for a room-by-room design and a written quote before committing to anything.
Grants and rules for heat pumps in England
Homes in Oakham can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for air source heat pump installation in Oakham
The ranges below are typical installed prices for homes in Rutland, including VAT. A survey sets the exact figure, because two similar-looking houses in Oakham can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Oakham
On the shortest day Oakham gets about 7 hours 37 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Oakham
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Oakham home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Oakham: questions
How soon can you survey a home in Oakham?
Survey dates depend on how busy installers are in Rutland. We offer the next available dates when you enquire and confirm them in writing.
How long does installation take in Oakham?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Oakham home states the expected time.
Do I need new radiators for a heat pump in Oakham?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Oakham home gives a room-by-room list.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.