- Area
- Somerset
- Postcode district
- BS21
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation in Clevedon: what to expect
The question for a Clevedon home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
For older properties in Clevedon, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized. In Clevedon, cylinder space is planned with you, often in an airing cupboard, utility room or garage.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Homes replacing a gas, oil, LPG or electric heating system
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Free home survey and room-by-room heat loss calculation
- Outdoor unit, hot water cylinder and weather compensation controls
- Radiator and pipework changes where the design needs them
- Boiler Upgrade Scheme application in England and Wales where eligible
- System design, unit sizing and a written quote
Terraced streets in Clevedon often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Clevedon quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Clevedon
Here are typical prices for air source heat pump installation in Somerset, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Clevedon and what they mean
Clevedon sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 38 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
How installation works in Clevedon
- Start online with a guide price or call us.
- A home survey in Clevedon gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air source heat pump installation in Clevedon: questions
Where would the outdoor unit go on a Clevedon house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Clevedon home.
Do you cover Nailsea as well as Clevedon?
Yes. We arrange surveys and installation in Nailsea, which is about 4 miles east of Clevedon, and across Somerset.
How long does installation take in Clevedon?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Clevedon home states the expected time.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.