- Area
- Warwickshire
- Postcode district
- CV8
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Air source heat pump installation for Kenilworth homes
Homes around Kenilworth range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Installers working in Kenilworth plan the order of work so heating and hot water are off for as short a time as practical. For older properties in Kenilworth, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Homes replacing a gas, oil, LPG or electric heating system
- Owners who want one contract covering design, fitting and paperwork
What's included
- Boiler Upgrade Scheme application in England and Wales where eligible
- Outdoor unit, hot water cylinder and weather compensation controls
- MCS registration and certificate, plus network operator notification
- Commissioning, handover and a walk-through of the controls
- Free home survey and room-by-room heat loss calculation
Many homes in Kenilworth have a side passage or rear garden with room for an outdoor unit, and the survey checks airflow and distance from neighbouring windows.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Kenilworth quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air source heat pump installation in Kenilworth
Guide prices for Kenilworth and the rest of Warwickshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Kenilworth
On the shortest day Kenilworth gets about 7 hours 41 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Kenilworth
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Kenilworth home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Kenilworth: questions
How long does installation take in Kenilworth?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Kenilworth home states the expected time.
Can you service a heat pump in Kenilworth that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Kenilworth, whoever fitted them. Tell us the make and model when you book.
How long does a heat pump survey take in Kenilworth?
A home survey in Kenilworth usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
What grants can I get for a heat pump?
It depends on where you live. In England and Wales the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump, which the installer claims and deducts from your quote. In Scotland, Home Energy Scotland offers a grant of up to £7,500, with up to £1,500 more for eligible rural and island homes, but you need a written funding offer before work starts. Northern Ireland has no dedicated homeowner heat pump grant at present.
Can I cancel after accepting the quote?
Nothing is ordered until you accept the written quote. Where the contract is agreed away from our premises, for example at your kitchen table, you can cancel within 14 days under the Consumer Contracts Regulations 2013. If you ask us to start sooner and then cancel, you pay only for work done up to that point.