- Area
- West Yorkshire
- Postcode district
- HD6
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Brighouse
Every property in Brighouse is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
In Brighouse, cylinder space is planned with you, often in an airing cupboard, utility room or garage. For older properties in Brighouse, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Owners who want one contract covering design, fitting and paperwork
- Houses with reasonable insulation, or a plan to improve it
- Owners and landlords in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Free home survey and room-by-room heat loss calculation
- Radiator and pipework changes where the design needs them
- MCS registration and certificate, plus network operator notification
- Boiler Upgrade Scheme application in England and Wales where eligible
- System design, unit sizing and a written quote
Installers working in Brighouse plan the order of work so heating and hot water are off for as short a time as practical.
Grants and rules for heat pumps in England
Homes in Brighouse can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air source heat pump installation prices in Brighouse
The ranges below are typical installed prices for homes in West Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Brighouse can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Brighouse and what they mean
On the shortest day Brighouse gets only about 7 hours 26 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
The steps for air source heat pump installation in Brighouse
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Brighouse; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air source heat pump installation in Brighouse: questions
Where would the outdoor unit go on a Brighouse house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Brighouse home.
How long does installation take in Brighouse?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Brighouse home states the expected time.
What size heat pump does a Brighouse home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Brighouse home.
Do I need new radiators for a heat pump?
Not always; many homes keep most of their radiators and change only a few. Because a heat pump runs at a lower water temperature than a boiler, each radiator gives out less heat, so the survey checks every room against its heat loss. Rooms where the existing radiator falls short get a larger one, with a guide price of £250–£450 each, installed and including VAT.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.