- Area
- West Yorkshire
- Postcode district
- BD21
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
What to know about air source heat pump installation in Keighley
The question for a Keighley home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Homeowners across West Yorkshire can arrange a survey in Keighley for a room-by-room design and a written quote before committing to anything. Terraced streets in Keighley often mean a compact unit position at the rear, so siting and sound levels are checked carefully.
We survey your home, design a heat pump system around its real heat loss, and manage the installation from the first visit to the MCS certificate.
- Households with room for a hot water cylinder
- Owners who want one contract covering design, fitting and paperwork
- Houses with reasonable insulation, or a plan to improve it
What's included
- Removal of the old boiler or heaters
- Radiator and pipework changes where the design needs them
- Boiler Upgrade Scheme application in England and Wales where eligible
- Commissioning, handover and a walk-through of the controls
- Free home survey and room-by-room heat loss calculation
For older properties in Keighley, the heat loss calculation looks closely at solid walls, single glazing and draughts before any unit is sized.
Grants and rules for heat pumps in England
Homes in Keighley can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air source heat pump installation prices in Keighley
These are guide prices for West Yorkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Keighley and what they mean
Keighley sees roughly 7 hours 24 minutes of daylight in December and 17 hours 07 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
How installation works in Keighley
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Keighley home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air source heat pump installation in Keighley: questions
What size heat pump does a Keighley home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Keighley home.
How soon can you survey a home in Keighley?
Survey dates depend on how busy installers are in West Yorkshire. We offer the next available dates when you enquire and confirm them in writing.
Where would the outdoor unit go on a Keighley house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Keighley home.
Will an air source heat pump be noisy?
Heat pumps are designed to run quietly, but where the unit sits makes a real difference. The survey looks for a position away from bedroom windows and neighbours, with clear airflow, and the installation must pass the MCS noise assessment. The fan is most noticeable on very cold days when the unit works hardest, and a little vapour during the periodic defrost is normal.
How long does an air source heat pump installation take?
A typical home installation takes 2–4 days on site. It takes longer if several radiators are being replaced, pipework is being upgraded or the cylinder is going in a new location. Your quote sets out the expected programme, including when you will be without heating and hot water. Timings are typical rather than fixed, because older homes sometimes reveal surprises once floorboards are lifted.

