- Area
- Argyll and Bute
- Postcode district
- G84
- Nation
- Scotland
- Guide price
- From £2,600 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Helensburgh homes
Every property in Helensburgh is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Extensions and garden rooms in Helensburgh that are hard to connect to the main heating can have their own air-to-air unit. A survey in Helensburgh covers indoor unit positions, pipe routes and hot water for homes across Argyll and Bute.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Households that already have, or will add, a separate source of hot water
- Flats and apartments with storage or panel heaters
What's included
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
- Electrical supply and controls set up for each room
Installers in Helensburgh plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in Scotland
In Scotland, heat pump funding comes through Home Energy Scotland rather than the Boiler Upgrade Scheme: a grant of up to £7,500 (up to £1,500 extra for eligible rural and island homes) and an optional interest-free loan of up to £7,500. For a Helensburgh home, apply and receive the written offer before the installation date is fixed.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Helensburgh property at survey.
Air-to-air heat pumps prices in Helensburgh
These are guide prices for Argyll and Bute, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,600–£5,400 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,300–£8,650 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Winter daylight and heating in Helensburgh
Helensburgh has about 6 hours 57 minutes of daylight at midwinter against 17 hours 37 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
The steps for air-to-air heat pumps in Helensburgh
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Helensburgh; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Helensburgh: questions
Can you service a heat pump in Helensburgh that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Helensburgh, whoever fitted them. Tell us the make and model when you book.
Do you cover Greenock as well as Helensburgh?
Yes. We arrange surveys and installation in Greenock, which is about 4 miles south of Helensburgh, and across Argyll and Bute.
Where would the outdoor unit go on a Helensburgh house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Helensburgh home.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.