- Area
- Bedfordshire
- Postcode district
- SG18
- Nation
- England
- Guide price
- From £2,450 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Biggleswade: what to expect
Every property in Biggleswade is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Top-floor rooms in Biggleswade that overheat in summer gain from the cooling an air-to-air system provides. Flats in Biggleswade on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Homes where fitting radiators and pipework would be very disruptive
- Rooms that get too hot in summer as well as cold in winter
What's included
- Electrical supply and controls set up for each room
- Outdoor unit and indoor units for each room
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
Installers in Biggleswade plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Biggleswade quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air-to-air heat pumps prices in Biggleswade
The ranges below are typical installed prices for homes in Bedfordshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Biggleswade can need quite different radiators and pipework.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,450–£5,100 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,100–£8,150 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Short winter days in Biggleswade and what they mean
Biggleswade has about 7 hours 43 minutes of daylight at midwinter and 16 hours 45 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
From survey to switch-on in Biggleswade
- Start online with a guide price or call us.
- A home survey in Biggleswade gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Biggleswade: questions
How soon can you survey a home in Biggleswade?
Survey dates depend on how busy installers are in Bedfordshire. We offer the next available dates when you enquire and confirm them in writing.
Do you cover Sandy as well as Biggleswade?
Yes. We arrange surveys and installation in Sandy, which is about 3 miles north of Biggleswade, and across Bedfordshire.
How long does a heat pump survey take in Biggleswade?
A home survey in Biggleswade usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.