- Area
- County Antrim
- Postcode district
- BT1
- Nation
- Northern Ireland
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Belfast homes
Homes around Belfast range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Flats in Belfast on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework. Top-floor rooms in Belfast that overheat in summer gain from the cooling an air-to-air system provides.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Households that already have, or will add, a separate source of hot water
- Flats and apartments with storage or panel heaters
What's included
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
Installers in Belfast plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in Northern Ireland
Northern Ireland does not have a dedicated heat pump grant for homeowners at present, and the Boiler Upgrade Scheme does not apply here. Heat pumps have sometimes been funded through the Northern Ireland Sustainable Energy Programme, so it is worth checking what is open when you enquire about a home in Belfast.
There is no VAT on installing a heat pump in Northern Ireland until 31 March 2027, the same as in Great Britain. Planning and building control here follow Northern Ireland's own rules, so the survey checks the unit position against them.
Air-to-air heat pumps prices in Belfast
Here are typical prices for air-to-air heat pumps in County Antrim, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,850 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,750 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Winter daylight and heating in Belfast
Belfast sees roughly 7 hours 15 minutes of daylight in December and 17 hours 17 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
The steps for air-to-air heat pumps in Belfast
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Belfast home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Belfast: questions
Do I need new radiators for a heat pump in Belfast?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Belfast home gives a room-by-room list.
Where would the outdoor unit go on a Belfast house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Belfast home.
What size heat pump does a Belfast home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Belfast home.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.