- Area
- County Antrim
- Postcode district
- BT56
- Nation
- Northern Ireland
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Portrush homes
Every property in Portrush is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Flats in Portrush on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework. A survey in Portrush covers indoor unit positions, pipe routes and hot water for homes across County Antrim.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Homes where fitting radiators and pipework would be very disruptive
- Households that already have, or will add, a separate source of hot water
What's included
- Outdoor unit and indoor units for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
- Electrical supply and controls set up for each room
- Free survey covering rooms to heat, unit positions and hot water options
Top-floor rooms in Portrush that overheat in summer gain from the cooling an air-to-air system provides.
Grants and rules for heat pumps in Northern Ireland
Northern Ireland does not have a dedicated heat pump grant for homeowners at present, and the Boiler Upgrade Scheme does not apply here. Heat pumps have sometimes been funded through the Northern Ireland Sustainable Energy Programme, so it is worth checking what is open when you enquire about a home in Portrush.
There is no VAT on installing a heat pump in Northern Ireland until 31 March 2027, the same as in Great Britain. Planning and building control here follow Northern Ireland's own rules, so the survey checks the unit position against them.
Air-to-air heat pumps costs around Portrush
These are guide prices for County Antrim, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,850 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,750 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Short winter days in Portrush and what they mean
On the shortest day Portrush gets only about 7 hours 07 minutes of daylight and the noon sun sits around 11° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
The steps for air-to-air heat pumps in Portrush
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Portrush; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Portrush: questions
How long does installation take in Portrush?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Portrush home states the expected time.
Where would the outdoor unit go on a Portrush house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Portrush home.
How long does a heat pump survey take in Portrush?
A home survey in Portrush usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.