- Area
- Derbyshire
- Postcode district
- DE1
- Nation
- England
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Derby
A heat pump suits most Derby homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Extensions and garden rooms in Derby that are hard to connect to the main heating can have their own air-to-air unit. A survey in Derby covers indoor unit positions, pipe routes and hot water for homes across Derbyshire.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Homes where fitting radiators and pipework would be very disruptive
- Flats and apartments with storage or panel heaters
- Rooms that get too hot in summer as well as cold in winter
What's included
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Condensate drains and neat external pipe covers
- Electrical supply and controls set up for each room
- Free survey covering rooms to heat, unit positions and hot water options
Top-floor rooms in Derby that overheat in summer gain from the cooling an air-to-air system provides.
Grants and rules for heat pumps in England
Homes in Derby can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Air-to-air heat pumps prices in Derby
These are guide prices for Derbyshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Winter daylight and heating in Derby
On the shortest day Derby gets about 7 hours 34 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for air-to-air heat pumps in Derby
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Derby; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Derby: questions
Do you cover Belper as well as Derby?
Yes. We arrange surveys and installation in Belper, which is about 7 miles north of Derby, and across Derbyshire.
What size heat pump does a Derby home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Derby home.
Can you service a heat pump in Derby that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Derby, whoever fitted them. Tell us the make and model when you book.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.