- Area
- Dyfed
- Postcode district
- SA73
- Nation
- Wales
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Milford Haven homes
Homes around Milford Haven range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
For terraced homes in Milford Haven, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room. Installers in Milford Haven plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Homes where fitting radiators and pipework would be very disruptive
- Rooms that get too hot in summer as well as cold in winter
What's included
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Condensate drains and neat external pipe covers
- Electrical supply and controls set up for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
Flats in Milford Haven on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework.
Grants and rules for heat pumps in Wales
In Wales the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027; £2,500 for air-to-air). The MCS-certified installer named in your quote applies to Ofgem for you, and the grant comes off your Milford Haven quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Wales has its own permitted development rules for air source heat pumps, so we check what applies to your property, including listed building and conservation-area constraints, at the survey.
Air-to-air heat pumps costs around Milford Haven
The ranges below are typical installed prices for homes in Dyfed, including VAT. A survey sets the exact figure, because two similar-looking houses in Milford Haven can need quite different radiators and pipework.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Winter daylight and heating in Milford Haven
Milford Haven has about 7 hours 47 minutes of daylight at midwinter and 16 hours 41 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Milford Haven
- Start online with a guide price or call us.
- A home survey in Milford Haven gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Milford Haven: questions
Do you cover Pembroke Dock as well as Milford Haven?
Yes. We arrange surveys and installation in Pembroke Dock, which is about 4 miles east of Milford Haven, and across Dyfed.
Where would the outdoor unit go on a Milford Haven house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Milford Haven home.
Can you service a heat pump in Milford Haven that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Milford Haven, whoever fitted them. Tell us the make and model when you book.
Can air-to-air heat pumps cool as well as heat?
Yes. Most air-to-air systems can reverse their cycle to cool and dehumidify rooms in summer, which makes them useful for loft rooms, south-facing extensions and home offices that overheat. Cooling uses electricity, so running costs rise if it is used heavily. You control heating and cooling for each room separately.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.