- Area
- Greater London
- Postcode district
- KT1
- Nation
- England
- Guide price
- From £2,700 inc VAT
- Survey
- Free for installation enquiries
Before you book: air-to-air heat pumps in Kingston upon Thames
The question for a Kingston upon Thames home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Flats in Kingston upon Thames on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework. A survey in Kingston upon Thames covers indoor unit positions, pipe routes and hot water for homes across Greater London.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Flats and apartments with storage or panel heaters
- Homes where fitting radiators and pipework would be very disruptive
What's included
- Electrical supply and controls set up for each room
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Outdoor unit and indoor units for each room
- Free survey covering rooms to heat, unit positions and hot water options
- Condensate drains and neat external pipe covers
Installers in Kingston upon Thames plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Kingston upon Thames quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Air-to-air heat pumps prices in Kingston upon Thames
Here are typical prices for air-to-air heat pumps in Greater London, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,700–£5,600 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,500–£8,950 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Kingston upon Thames?
Kingston upon Thames sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 37 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
What happens after you enquire in Kingston upon Thames?
- Start online with a guide price or call us.
- A home survey in Kingston upon Thames gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Kingston upon Thames: questions
How long does installation take in Kingston upon Thames?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Kingston upon Thames home states the expected time.
Can you service a heat pump in Kingston upon Thames that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Kingston upon Thames, whoever fitted them. Tell us the make and model when you book.
What size heat pump does a Kingston upon Thames home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Kingston upon Thames home.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.