- Area
- Highlands and Islands
- Postcode district
- IV26
- Nation
- Scotland
- Guide price
- From £2,700 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Ullapool homes
In Ullapool, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
A survey in Ullapool covers indoor unit positions, pipe routes and hot water for homes across the Highlands and Islands. Extensions and garden rooms in Ullapool that are hard to connect to the main heating can have their own air-to-air unit.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Households that already have, or will add, a separate source of hot water
- Rooms that get too hot in summer as well as cold in winter
- Extensions, conservatories and garden rooms
What's included
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
Installers in Ullapool plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Ullapool can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
What to budget for air-to-air heat pumps in Ullapool
Here are typical prices for air-to-air heat pumps in the Highlands and Islands, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,700–£5,600 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,500–£8,950 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Short winter days in Ullapool and what they mean
On the shortest day Ullapool gets only about 6 hours 29 minutes of daylight, with the sun around 9° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
The steps for air-to-air heat pumps in Ullapool
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Ullapool home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Ullapool is in an area we cover by arrangement, so survey dates and any travel costs are confirmed individually in your quote.
Air-to-air heat pumps in Ullapool: questions
Can you service a heat pump in Ullapool that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Ullapool, whoever fitted them. Tell us the make and model when you book.
How long does installation take in Ullapool?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Ullapool home states the expected time.
How long does a heat pump survey take in Ullapool?
A home survey in Ullapool usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.