Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Air-to-air heat pumps
England · 6 towns

Air-to-air heat pumps in the Isle of Wight

Air source heat pump installation, servicing and repairs across the Isle of Wight: free home surveys for installation enquiries, guide prices online and fixed written quotes.

Hot water has to come from elsewhere, such as an existing immersion cylinder, an electric water heater or a separate hot water heat pump. In England and Wales, the Boiler Upgrade Scheme now includes a grant of £2,500 for air-to-air heat pumps in homes, from 28 April 2026, subject to the scheme's conditions. The installer must be MCS-certified to apply, and the refrigerant work must be done by an F-gas certified engineer.

For terraced homes in the Isle of Wight, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room. Installers in the Isle of Wight plan condensate drains and pipe covers so indoor and outdoor runs stay neat. A survey in the Isle of Wight covers indoor unit positions, pipe routes and hot water for homes across the Isle of Wight.

Who it suits

  • Homes where fitting radiators and pipework would be very disruptive
  • Households that already have, or will add, a separate source of hot water
  • Rooms that get too hot in summer as well as cold in winter
  • Extensions, conservatories and garden rooms

Grants and rules for heat pumps in England

England

Homes in the Isle of Wight can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.

Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.

Air-to-air heat pumps prices in the Isle of Wight

These are guide prices for the Isle of Wight, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.

Air-to-air heat pumps prices in the Isle of Wight
SystemInstalled guide price
Air-to-air heat pump, 1–2 rooms£2,550–£5,300
Air-to-air heat pump, multi-room 3–4 bedroom home£4,250–£8,500

Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.

Towns we cover in the Isle of Wight

We cover 6 towns in the Isle of Wight for air-to-air heat pumps. Each links to local guide prices and the grant position for England.

TownPostcode districtNearest townMidwinter daylight
Newport (Isle of Wight)PO30Cowes7 h 57 min
RydePO33Sandown7 h 57 min
CowesPO31Newport (Isle of Wight)7 h 57 min
SandownPO36Shanklin7 h 58 min
ShanklinPO37Sandown7 h 58 min
VentnorPO38Shanklin7 h 59 min

Air-to-air heat pumps questions

Are air-to-air heat pumps suitable for flats?

Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.

Can an air-to-air heat pump heat my water?

No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.

How do I look after an air-to-air system?

Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.

How much sound do the indoor units make?

Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote