- Area
- Lancashire
- Postcode district
- LA4
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
What to know about air-to-air heat pumps in Morecambe
The question for a Morecambe home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Top-floor rooms in Morecambe that overheat in summer gain from the cooling an air-to-air system provides. Extensions and garden rooms in Morecambe that are hard to connect to the main heating can have their own air-to-air unit.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Households that already have, or will add, a separate source of hot water
- Homes where fitting radiators and pipework would be very disruptive
What's included
- Electrical supply and controls set up for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
For terraced homes in Morecambe, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Morecambe quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for air-to-air heat pumps in Morecambe
Guide prices for Morecambe and the rest of Lancashire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,900 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,850 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Designing for Morecambe's winters
On the shortest day Morecambe gets only about 7 hours 21 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
How installation works in Morecambe
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Morecambe home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Morecambe: questions
What size heat pump does a Morecambe home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Morecambe home.
How long does installation take in Morecambe?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Morecambe home states the expected time.
Where would the outdoor unit go on a Morecambe house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Morecambe home.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.