- Area
- Perth and Kinross
- Postcode district
- PH16
- Nation
- Scotland
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Pitlochry: what to expect
Most homes can run on a heat pump if the system is designed properly, and Pitlochry is no different. The key is matching the heat pump and radiators to the home's heat loss.
Installers in Pitlochry plan condensate drains and pipe covers so indoor and outdoor runs stay neat. For terraced homes in Pitlochry, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Flats and apartments with storage or panel heaters
- Households that already have, or will add, a separate source of hot water
What's included
- Condensate drains and neat external pipe covers
- Free survey covering rooms to heat, unit positions and hot water options
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Electrical supply and controls set up for each room
- Outdoor unit and indoor units for each room
A survey in Pitlochry covers indoor unit positions, pipe routes and hot water for homes across Perth and Kinross.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Pitlochry can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Scotland has its own permitted development rules for air source heat pumps and its own building standards, so we confirm what applies to your Pitlochry property at survey.
Air-to-air heat pumps costs around Pitlochry
Guide prices for Pitlochry and the rest of Perth and Kinross are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,050 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,050–£8,100 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water.
Designing for Pitlochry's winters
On the shortest day Pitlochry gets only about 6 hours 47 minutes of daylight, with the sun around 10° up at noon. Long Scottish winters mean the heat pump runs for much of the year, so careful sizing, good controls and correctly sized radiators make a real difference.
From survey to switch-on in Pitlochry
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Pitlochry; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Pitlochry: questions
Do I need new radiators for a heat pump in Pitlochry?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Pitlochry home gives a room-by-room list.
What size heat pump does a Pitlochry home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Pitlochry home.
How long does a heat pump survey take in Pitlochry?
A home survey in Pitlochry usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.