- Area
- Powys
- Postcode district
- SY21
- Nation
- Wales
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Welshpool: what to expect
Every property in Welshpool is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
A survey in Welshpool covers indoor unit positions, pipe routes and hot water for homes across Powys. Installers in Welshpool plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Flats and apartments with storage or panel heaters
- Rooms that get too hot in summer as well as cold in winter
- Households that already have, or will add, a separate source of hot water
What's included
- Electrical supply and controls set up for each room
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Condensate drains and neat external pipe covers
- Free survey covering rooms to heat, unit positions and hot water options
- Outdoor unit and indoor units for each room
Extensions and garden rooms in Welshpool that are hard to connect to the main heating can have their own air-to-air unit.
Grants and rules for heat pumps in Wales
In Wales the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027; £2,500 for air-to-air). The MCS-certified installer named in your quote applies to Ofgem for you, and the grant comes off your Welshpool quote.
There is no VAT on installing a heat pump anywhere in the UK, Wales included, until 31 March 2027. Planning rules for heat pumps in Wales are set by the Welsh Government and differ from England's, so the surveyor checks the unit position against them.
Air-to-air heat pumps prices in Welshpool
These are guide prices for Powys, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Designing for Welshpool's winters
Welshpool has about 7 hours 37 minutes of daylight at midwinter and 16 hours 52 minutes at midsummer. That swing matters if you pair a heat pump with solar panels: summer generation can cover much of the hot water, winter generation far less.
How installation works in Welshpool
- Start online with a guide price or call us.
- A home survey in Welshpool gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Air-to-air heat pumps in Welshpool: questions
How long does a heat pump survey take in Welshpool?
A home survey in Welshpool usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump in Welshpool?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Welshpool home gives a room-by-room list.
Do you cover Newtown as well as Welshpool?
Yes. We arrange surveys and installation in Newtown, which is about 12 miles south-west of Welshpool, and across Powys.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.