Air source heat pumps, surveyed, designed and installed· Free home survey for installation enquiries
0800 088 6341
Air-to-air heat pumps
Tyne and Wear · NE28

Air-to-air heat pumps in Wallsend

Looking into air-to-air heat pumps for a home in Wallsend? We look at the whole heating system — emitters, pipework, cylinder space and controls — so the heat pump can run efficiently.

Area
Tyne and Wear
Postcode district
NE28
Nation
England
Guide price
From £2,350 inc VAT
Survey
Free for installation enquiries

What to know about air-to-air heat pumps in Wallsend

In Wallsend, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.

Flats in Wallsend on storage or panel heaters can often switch to air-to-air without fitting radiators or pipework. A survey in Wallsend covers indoor unit positions, pipe routes and hot water for homes across Tyne and Wear.

An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.

  • Rooms that get too hot in summer as well as cold in winter
  • Households that already have, or will add, a separate source of hot water
  • Extensions, conservatories and garden rooms

What's included

  • Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
  • Condensate drains and neat external pipe covers
  • Free survey covering rooms to heat, unit positions and hot water options
  • Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
  • Electrical supply and controls set up for each room

Extensions and garden rooms in Wallsend that are hard to connect to the main heating can have their own air-to-air unit.

Grants and rules for heat pumps in England

England

Homes in Wallsend can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.

Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.

Air-to-air heat pumps costs around Wallsend

The ranges below are typical installed prices for homes in Tyne and Wear, including VAT. A survey sets the exact figure, because two similar-looking houses in Wallsend can need quite different radiators and pipework.

Air-to-air heat pumps costs around Wallsend
SystemInstalled guide price
Air-to-air heat pump, 1–2 rooms£2,350–£4,850
Air-to-air heat pump, multi-room 3–4 bedroom home£3,900–£7,750

Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.

How long is the heating season in Wallsend?

7 h 10 minDaylight on the shortest day
17 h 22 minDaylight on the longest day
12°Noon sun height in December
54.99°NLatitude of Wallsend

On the shortest day Wallsend gets only about 7 hours 10 minutes of daylight and the noon sun sits around 12° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.

The steps for air-to-air heat pumps in Wallsend

  1. Tell us about your home: postcode, property type and current heating.
  2. We book a survey in Wallsend; the surveyor measures rooms, windows and radiators and looks at cylinder space.
  3. The design and quote arrive in writing, including radiator changes and the outdoor unit position.
  4. On installation days the old system is removed and the new one fitted and filled.
  5. We commission the heat pump, show you the controls and register the installation.

Air-to-air heat pumps in Wallsend: questions

What size heat pump does a Wallsend home need?

It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Wallsend home.

How long does a heat pump survey take in Wallsend?

A home survey in Wallsend usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.

Do you cover Jarrow as well as Wallsend?

Yes. We arrange surveys and installation in Jarrow, which is about 2 miles east of Wallsend, and across Tyne and Wear.

Can air-to-air heat pumps cool as well as heat?

Yes. Most air-to-air systems can reverse their cycle to cool and dehumidify rooms in summer, which makes them useful for loft rooms, south-facing extensions and home offices that overheat. Cooling uses electricity, so running costs rise if it is used heavily. You control heating and cooling for each room separately.

Are air-to-air heat pumps suitable for flats?

Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.

Ready to price your heat pump?

Use the guide price tool, or book a free home survey and fixed written quote.

CallGet a quote