- Area
- West Yorkshire
- Postcode district
- BD1
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Bradford homes
Most homes can run on a heat pump if the system is designed properly, and Bradford is no different. The key is matching the heat pump and radiators to the home's heat loss.
A survey in Bradford covers indoor unit positions, pipe routes and hot water for homes across West Yorkshire. Extensions and garden rooms in Bradford that are hard to connect to the main heating can have their own air-to-air unit.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Extensions, conservatories and garden rooms
- Rooms that get too hot in summer as well as cold in winter
- Homes where fitting radiators and pipework would be very disruptive
What's included
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Electrical supply and controls set up for each room
- Condensate drains and neat external pipe covers
- Free survey covering rooms to heat, unit positions and hot water options
For terraced homes in Bradford, the outdoor unit can often sit in a rear yard with tidy pipe runs to each room.
Grants and rules for heat pumps in England
Homes in Bradford can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for air-to-air heat pumps in Bradford
Guide prices for Bradford and the rest of West Yorkshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,900 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,850 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Bradford?
On the shortest day Bradford gets only about 7 hours 25 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
From survey to switch-on in Bradford
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Bradford home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Air-to-air heat pumps in Bradford: questions
Where would the outdoor unit go on a Bradford house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Bradford home.
How long does a heat pump survey take in Bradford?
A home survey in Bradford usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do you cover Cleckheaton as well as Bradford?
Yes. We arrange surveys and installation in Cleckheaton, which is about 5 miles south of Bradford, and across West Yorkshire.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
Are air-to-air heat pumps suitable for flats?
Often, yes. They need no radiators, pipework or cylinder, so they suit flats heated by storage or panel heaters. You need a position for the outdoor unit, such as a balcony, wall bracket or ground-floor yard, and leaseholders normally need the freeholder's or management company's consent. Planning rules for flats differ by nation, so we check what applies at survey.