- Area
- West Yorkshire
- Postcode district
- LS27
- Nation
- England
- Guide price
- From £2,350 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps in Morley: what to expect
Every property in Morley is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
A survey in Morley covers indoor unit positions, pipe routes and hot water for homes across West Yorkshire. Extensions and garden rooms in Morley that are hard to connect to the main heating can have their own air-to-air unit.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Homes where fitting radiators and pipework would be very disruptive
- Flats and apartments with storage or panel heaters
- Extensions, conservatories and garden rooms
What's included
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Free survey covering rooms to heat, unit positions and hot water options
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Condensate drains and neat external pipe covers
Installers in Morley plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Morley quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for air-to-air heat pumps in Morley
Guide prices for Morley and the rest of West Yorkshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,350–£4,900 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £3,900–£7,850 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
Designing for Morley's winters
Morley sees roughly 7 hours 25 minutes of daylight in December and 17 hours 05 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
What happens after you enquire in Morley?
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Morley; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Morley: questions
How soon can you survey a home in Morley?
Survey dates depend on how busy installers are in West Yorkshire. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Morley?
A home survey in Morley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Morley house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Morley home.
How do I look after an air-to-air system?
Clean the indoor unit filters regularly, typically every few weeks during heavy use and following the manufacturer's guidance, and keep the outdoor unit clear of leaves and snow. Annual servicing is recommended and is often a condition of the manufacturer's warranty. Any work on the refrigerant circuit must be done by an F-gas certified engineer.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.