- Area
- Worcestershire
- Postcode district
- WR14
- Nation
- England
- Guide price
- From £2,400 inc VAT
- Survey
- Free for installation enquiries
Air-to-air heat pumps for Malvern homes
Homes around Malvern range from older terraces to newer estates, and each needs a different design. That is why we survey before we quote.
Top-floor rooms in Malvern that overheat in summer gain from the cooling an air-to-air system provides. Installers in Malvern plan condensate drains and pipe covers so indoor and outdoor runs stay neat.
An air-to-air heat pump warms rooms directly with air, and can cool them in summer, but it does not heat your hot water.
- Rooms that get too hot in summer as well as cold in winter
- Extensions, conservatories and garden rooms
- Flats and apartments with storage or panel heaters
What's included
- Commissioning, MCS certificate and the air-to-air grant claim in England and Wales where eligible
- Electrical supply and controls set up for each room
- Refrigerant pipe runs to each indoor unit, made and charged by an F-gas certified engineer
- Outdoor unit and indoor units for each room
- Free survey covering rooms to heat, unit positions and hot water options
A survey in Malvern covers indoor unit positions, pipe routes and hot water for homes across Worcestershire.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Malvern quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for air-to-air heat pumps in Malvern
The ranges below are typical installed prices for homes in Worcestershire, including VAT. A survey sets the exact figure, because two similar-looking houses in Malvern can need quite different radiators and pipework.
| System | Installed guide price |
|---|---|
| Air-to-air heat pump, 1–2 rooms | £2,400–£5,000 |
| Air-to-air heat pump, multi-room 3–4 bedroom home | £4,000–£8,000 |
Installed, inc VAT. Air-to-air systems heat (and can cool) rooms but do not provide hot water. In England and Wales the Boiler Upgrade Scheme gives £2,500 towards an air-to-air system in a home, deducted from your quote where eligible.
How long is the heating season in Malvern?
On the shortest day Malvern gets about 7 hours 43 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
From survey to switch-on in Malvern
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Malvern; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Air-to-air heat pumps in Malvern: questions
Do I need new radiators for a heat pump in Malvern?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Malvern home gives a room-by-room list.
How soon can you survey a home in Malvern?
Survey dates depend on how busy installers are in Worcestershire. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Malvern home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Malvern home.
Can an air-to-air heat pump heat my water?
No. An air-to-air heat pump heats and cools the air in rooms but does not produce hot water. You need a separate source, such as an existing immersion cylinder, a hot water heat pump or an electric water heater. If you want one system for heating and hot water, an air-to-water heat pump with a cylinder is the alternative.
How much sound do the indoor units make?
Indoor units are designed to run quietly, with a fan you will hear most when heating or cooling at full output. Lower fan settings and night modes reduce sound in bedrooms. Siting matters for the outdoor unit too: it needs airflow and a position that passes the MCS noise assessment. Ask to see the sound levels of the proposed units at survey.