- Area
- West Yorkshire
- Postcode district
- BD16
- Nation
- England
- Nearby
- Keighley, Bradford, Guiseley
We cover Bingley and nearby Keighley, Bradford and the rest of West Yorkshire. A heat pump is a whole-system change, so the survey looks at radiators, pipework, the hot water cylinder and the best spot for the outdoor unit.
Heat pump services in Bingley
All services in Bingley:
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Bingley quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Heat pump guide prices in Bingley
Here are typical prices for an air source heat pump in West Yorkshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Short winter days in Bingley and what they mean
Bingley sees roughly 7 hours 24 minutes of daylight in December and 17 hours 07 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
Heat pumps in Bingley: questions
Do you cover Keighley as well as Bingley?
Yes. We arrange surveys and installation in Keighley, which is about 3 miles north-west of Bingley, and across West Yorkshire.
What size heat pump does a Bingley home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Bingley home.
How long does installation take in Bingley?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Bingley home states the expected time.
How long does a heat pump survey take in Bingley?
A home survey in Bingley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.