- Area
- Bedfordshire
- Postcode district
- MK42
- Nation
- England
- Guide price
- From £9,700 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump in Kempston: what to expect
A heat pump suits most Kempston homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Many gas-heated homes in Kempston have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. Rear gardens and side returns in Kempston usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Households ready to give up gas entirely and drop the standing charge
- Boilers that are old, unreliable or due for replacement
- Combi owners who can find space for a hot water cylinder
What's included
- Free survey with heat loss calculation and cylinder siting
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Heat pump cylinder, outdoor unit and weather compensation controls
Households across Bedfordshire moving off gas can have a survey in Kempston that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Kempston quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump prices in Kempston
Here are typical prices for replacing a gas boiler with a heat pump in Bedfordshire, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,700–£12,750 | £2,200–£5,250 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,700–£13,750 | £3,200–£6,250 |
| 3 bedroom semi or small detached | 6–9 kW | £12,250–£15,800 | £4,750–£8,300 |
| 4 bedroom detached | 8–12 kW | £14,300–£18,350 | £6,800–£10,850 |
| 5+ bedroom or larger older house | 11–16 kW | £16,850–£22,950 | £9,350–£15,450 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Kempston's winters
On the shortest day Kempston gets about 7 hours 43 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
The steps for replacing a gas boiler with a heat pump in Kempston
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Kempston home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Kempston: questions
How long does a heat pump survey take in Kempston?
A home survey in Kempston usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can you service a heat pump in Kempston that someone else installed?
Yes. We arrange servicing and repairs for most air source heat pumps in Kempston, whoever fitted them. Tell us the make and model when you book.
What size heat pump does a Kempston home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Kempston home.
What if my gas boiler is fairly new?
A newer boiler can still be replaced, but the timing is worth weighing. Some owners switch when the boiler needs a major repair; others prefer to plan the change for a convenient time. Across the UK, heat pump installation is zero-rated for VAT until 31 March 2027. A hybrid system, which keeps the boiler alongside a heat pump, is another option, though it is not eligible for the Boiler Upgrade Scheme in England and Wales.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.