- Area
- East Riding of Yorkshire
- Postcode district
- HU17
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Beverley
Most homes can run on a heat pump if the system is designed properly, and Beverley is no different. The key is matching the heat pump and radiators to the home's heat loss.
Households across the East Riding of Yorkshire moving off gas can have a survey in Beverley that compares running costs on realistic assumptions. If your Beverley home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Combi owners who can find space for a hot water cylinder
- System or regular boiler homes with an existing airing cupboard
What's included
- Free survey with heat loss calculation and cylinder siting
- Capping of the gas pipe at the boiler position where you are giving up gas
- Heat pump cylinder, outdoor unit and weather compensation controls
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Removal of the gas boiler, flue and any loft tanks
Installers in Beverley take out the old boiler and flue and seal the wall opening as part of the job.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Beverley quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
What to budget for replacing a gas boiler with a heat pump in Beverley
Guide prices for Beverley and the rest of the East Riding of Yorkshire are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Beverley's winters
Beverley sees roughly 7 hours 24 minutes of daylight in December and 17 hours 07 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
The steps for replacing a gas boiler with a heat pump in Beverley
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Beverley home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Beverley: questions
Where would the outdoor unit go on a Beverley house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Beverley home.
How long does a heat pump survey take in Beverley?
A home survey in Beverley usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do you cover Hull as well as Beverley?
Yes. We arrange surveys and installation in Hull, which is about 8 miles south-east of Beverley, and across the East Riding of Yorkshire.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.