- Area
- Greater London
- Postcode district
- W3
- Nation
- England
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump for Acton homes
The question for an Acton home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Rear gardens and side returns in Acton usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. If your Acton home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- System or regular boiler homes with an existing airing cupboard
What's included
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Free survey with heat loss calculation and cylinder siting
- System flush and radiator upgrades where the design calls for them
Installers in Acton take out the old boiler and flue and seal the wall opening as part of the job.
Grants and rules for heat pumps in England
Homes in Acton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
What to budget for replacing a gas boiler with a heat pump in Acton
The ranges below are typical installed prices for homes in Greater London, including VAT. A survey sets the exact figure, because two similar-looking houses in Acton can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Acton's winters
On the shortest day Acton gets about 7 hours 49 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
How installation works in Acton
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Acton; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing a gas boiler with a heat pump in Acton: questions
What size heat pump does an Acton home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Acton home.
How long does installation take in Acton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for an Acton home states the expected time.
Do I need new radiators for a heat pump in Acton?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Acton home gives a room-by-room list.
Is there a grant to replace a gas boiler with a heat pump?
In England and Wales, the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump that replaces a gas boiler, for eligible owners of existing homes. The MCS-certified installer applies to Ofgem and deducts the grant from your quote, and Ofgem contacts you to confirm. Scotland has separate Home Energy Scotland funding, and Northern Ireland has no dedicated homeowner grant at present.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.