- Area
- Greater London
- Postcode district
- IG11
- Nation
- England
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump for Barking homes
A heat pump suits most Barking homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Many gas-heated homes in Barking have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. Installers in Barking take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Households ready to give up gas entirely and drop the standing charge
- Combi owners who can find space for a hot water cylinder
What's included
- Heat pump cylinder, outdoor unit and weather compensation controls
- System flush and radiator upgrades where the design calls for them
- Removal of the gas boiler, flue and any loft tanks
- Free survey with heat loss calculation and cylinder siting
- Capping of the gas pipe at the boiler position where you are giving up gas
Households across Greater London moving off gas can have a survey in Barking that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Barking quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for replacing a gas boiler with a heat pump in Barking
Here are typical prices for replacing a gas boiler with a heat pump in Greater London, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Barking
On the shortest day Barking gets about 7 hours 49 minutes of daylight, and the winter sun reaches only around 15° above the horizon at noon. Winters this far south are milder than in most of the UK, which helps a heat pump run at low flow temperatures for much of the season.
How installation works in Barking
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Barking; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing a gas boiler with a heat pump in Barking: questions
Do I need new radiators for a heat pump in Barking?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Barking home gives a room-by-room list.
How soon can you survey a home in Barking?
Survey dates depend on how busy installers are in Greater London. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Barking?
A home survey in Barking usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.