- Area
- Greater London
- Postcode district
- SW11
- Nation
- England
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Battersea
The question for a Battersea home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Households across Greater London moving off gas can have a survey in Battersea that compares running costs on realistic assumptions. Installers in Battersea take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- System or regular boiler homes with an existing airing cupboard
What's included
- Capping of the gas pipe at the boiler position where you are giving up gas
- Removal of the gas boiler, flue and any loft tanks
- Free survey with heat loss calculation and cylinder siting
- System flush and radiator upgrades where the design calls for them
- Heat pump cylinder, outdoor unit and weather compensation controls
If your Battersea home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Battersea quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump costs around Battersea
These are guide prices for Greater London, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Battersea?
Battersea sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 38 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
The steps for replacing a gas boiler with a heat pump in Battersea
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Battersea; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing a gas boiler with a heat pump in Battersea: questions
What size heat pump does a Battersea home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Battersea home.
How long does a heat pump survey take in Battersea?
A home survey in Battersea usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
How long does installation take in Battersea?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Battersea home states the expected time.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
What if my gas boiler is fairly new?
A newer boiler can still be replaced, but the timing is worth weighing. Some owners switch when the boiler needs a major repair; others prefer to plan the change for a convenient time. Across the UK, heat pump installation is zero-rated for VAT until 31 March 2027. A hybrid system, which keeps the boiler alongside a heat pump, is another option, though it is not eligible for the Boiler Upgrade Scheme in England and Wales.