- Area
- Greater London
- Postcode district
- SW2
- Nation
- England
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Brixton
A heat pump suits most Brixton homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Households across Greater London moving off gas can have a survey in Brixton that compares running costs on realistic assumptions. If your Brixton home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Boilers that are old, unreliable or due for replacement
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Combi owners who can find space for a hot water cylinder
What's included
- Removal of the gas boiler, flue and any loft tanks
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- System flush and radiator upgrades where the design calls for them
- Heat pump cylinder, outdoor unit and weather compensation controls
- Capping of the gas pipe at the boiler position where you are giving up gas
Many gas-heated homes in Brixton have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Grants and rules for heat pumps in England
Homes in Brixton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Gas boiler to heat pump prices in Brixton
Here are typical prices for replacing a gas boiler with a heat pump in Greater London, installed and including VAT. Use the guide price tool for a figure based on your home, then a survey confirms it in writing.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 | £3,150–£6,500 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 | £4,250–£7,600 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 | £5,950–£9,850 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 | £8,200–£12,650 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 | £11,000–£17,700 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Brixton
Brixton sees roughly 7 hours 50 minutes of daylight in late December against 16 hours 38 minutes in June. Milder southern winters suit heat pumps well, though the system is still sized for a cold snap rather than an average day.
The steps for replacing a gas boiler with a heat pump in Brixton
- Tell us about your home: postcode, property type and current heating.
- We book a survey in Brixton; the surveyor measures rooms, windows and radiators and looks at cylinder space.
- The design and quote arrive in writing, including radiator changes and the outdoor unit position.
- On installation days the old system is removed and the new one fitted and filled.
- We commission the heat pump, show you the controls and register the installation.
Replacing a gas boiler with a heat pump in Brixton: questions
How soon can you survey a home in Brixton?
Survey dates depend on how busy installers are in Greater London. We offer the next available dates when you enquire and confirm them in writing.
How long does a heat pump survey take in Brixton?
A home survey in Brixton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Do I need new radiators for a heat pump in Brixton?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Brixton home gives a room-by-room list.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.