- Area
- Highlands and Islands
- Postcode district
- IV15
- Nation
- Scotland
- Guide price
- From £10,650 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump for Dingwall homes
Every property in Dingwall is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Many gas-heated homes in Dingwall have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder. If your Dingwall home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Households ready to give up gas entirely and drop the standing charge
- Boilers that are old, unreliable or due for replacement
- System or regular boiler homes with an existing airing cupboard
What's included
- Capping of the gas pipe at the boiler position where you are giving up gas
- Free survey with heat loss calculation and cylinder siting
- System flush and radiator upgrades where the design calls for them
- Heat pump cylinder, outdoor unit and weather compensation controls
- Removal of the gas boiler, flue and any loft tanks
Semi-detached and terraced houses in Dingwall often have an airing cupboard that can be reused for a heat pump cylinder.
Grants and rules for heat pumps in Scotland
The Boiler Upgrade Scheme does not apply in Scotland. Instead, homeowners in Dingwall can apply to Home Energy Scotland for a grant of up to £7,500 towards a heat pump, with up to £1,500 more for eligible rural and island homes, plus an optional interest-free loan of up to £7,500. You need a written funding offer before any work starts.
There is no VAT on installing a heat pump anywhere in the UK, Scotland included, until 31 March 2027. Scottish permitted development rules and building standards apply, and the surveyor checks the unit position and any listed or conservation-area constraints.
Gas boiler to heat pump prices in Dingwall
Guide prices for Dingwall and the rest of the Highlands and Islands are shown below, installed and inc VAT. We publish ranges rather than a single figure because design details move the price, and the written quote after survey fixes it.
| Home | Typical size | Installed guide price |
|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £10,650–£14,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £11,750–£15,100 |
| 3 bedroom semi or small detached | 6–9 kW | £13,450–£17,350 |
| 4 bedroom detached | 8–12 kW | £15,700–£20,150 |
| 5+ bedroom or larger older house | 11–16 kW | £18,500–£25,200 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning. In Scotland, Home Energy Scotland grants of up to £7,500 and interest-free loans may reduce the cost.
Short winter days in Dingwall and what they mean
Dingwall has about 6 hours 34 minutes of daylight at midwinter against 18 hours 04 minutes in midsummer. Heat pumps are designed to keep working well below freezing, but the design temperature for the survey is set for local conditions, not an average day.
How installation works in Dingwall
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Dingwall home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Dingwall: questions
How soon can you survey a home in Dingwall?
Survey dates depend on how busy installers are in the Highlands and Islands. We offer the next available dates when you enquire and confirm them in writing.
What size heat pump does a Dingwall home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Dingwall home.
Where would the outdoor unit go on a Dingwall house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Dingwall home.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.