- Area
- Lancashire
- Postcode district
- WN8
- Nation
- England
- Guide price
- From £9,300 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Skelmersdale
In Skelmersdale, as anywhere in the UK, the heat pumps that perform well are the ones designed around low flow temperatures and sized from a proper heat loss calculation.
Semi-detached and terraced houses in Skelmersdale often have an airing cupboard that can be reused for a heat pump cylinder. Rear gardens and side returns in Skelmersdale usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Combi owners who can find space for a hot water cylinder
- System or regular boiler homes with an existing airing cupboard
- Boilers that are old, unreliable or due for replacement
What's included
- System flush and radiator upgrades where the design calls for them
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Capping of the gas pipe at the boiler position where you are giving up gas
- Removal of the gas boiler, flue and any loft tanks
- Heat pump cylinder, outdoor unit and weather compensation controls
Installers in Skelmersdale take out the old boiler and flue and seal the wall opening as part of the job.
Grants and rules for heat pumps in England
Homes in Skelmersdale can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing a gas boiler with a heat pump in Skelmersdale
These are guide prices for Lancashire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,300–£12,250 | £1,800–£4,750 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,300–£13,250 | £2,800–£5,750 |
| 3 bedroom semi or small detached | 6–9 kW | £11,750–£15,200 | £4,250–£7,700 |
| 4 bedroom detached | 8–12 kW | £13,700–£17,650 | £6,200–£10,150 |
| 5+ bedroom or larger older house | 11–16 kW | £16,150–£22,050 | £8,650–£14,550 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
How long is the heating season in Skelmersdale?
Skelmersdale sees roughly 7 hours 27 minutes of daylight in December and 17 hours 03 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
The steps for replacing a gas boiler with a heat pump in Skelmersdale
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Skelmersdale home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Skelmersdale: questions
What size heat pump does a Skelmersdale home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Skelmersdale home.
Where would the outdoor unit go on a Skelmersdale house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Skelmersdale home.
How long does a heat pump survey take in Skelmersdale?
A home survey in Skelmersdale usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.