- Area
- Lincolnshire
- Postcode district
- PE9
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
What to know about replacing a gas boiler with a heat pump in Stamford
The question for a Stamford home is rarely whether a heat pump can work, but what needs to change to make it work well: radiator sizes, pipework, controls and where the unit goes.
Rear gardens and side returns in Stamford usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. Installers in Stamford take out the old boiler and flue and seal the wall opening as part of the job.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Combi owners who can find space for a hot water cylinder
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
What's included
- Heat pump cylinder, outdoor unit and weather compensation controls
- System flush and radiator upgrades where the design calls for them
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
- Free survey with heat loss calculation and cylinder siting
Households across Lincolnshire moving off gas can have a survey in Stamford that compares running costs on realistic assumptions.
Grants and rules for heat pumps in England
Homes in Stamford can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for replacing a gas boiler with a heat pump in Stamford
The ranges below are typical installed prices for homes in Lincolnshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Stamford can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Stamford
On the shortest day Stamford gets about 7 hours 37 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
How installation works in Stamford
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Stamford home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Stamford: questions
How long does installation take in Stamford?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Stamford home states the expected time.
What size heat pump does a Stamford home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Stamford home.
Do you cover Bourne as well as Stamford?
Yes. We arrange surveys and installation in Bourne, which is about 9 miles north-east of Stamford, and across Lincolnshire.
Should I have my gas meter removed?
If gas is used for nothing else, removing the meter ends the gas standing charge, which is about £108 a year at the October to December 2026 price cap. If you still cook on gas or have a gas fire, you will need to keep the supply. Meter removal is arranged through your gas supplier, usually once the heat pump is running; the pipe at the boiler position is capped during the installation.
Will my hot water run out with a heat pump?
Not if the cylinder is sized properly for your household. The survey asks how many people live in the home, how many bathrooms you have and whether you prefer baths or showers, then sizes the cylinder to suit. The heat pump reheats the cylinder on a schedule, often overnight and again during the day, and an immersion heater acts as a backup.