- Area
- North Yorkshire
- Postcode district
- BD23
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Gas boiler to heat pump for Skipton homes
Every property in Skipton is different, so the design starts from measurements rather than a rule of thumb. That keeps the system the right size and the running costs predictable.
Households across North Yorkshire moving off gas can have a survey in Skipton that compares running costs on realistic assumptions. Many gas-heated homes in Skipton have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Boilers that are old, unreliable or due for replacement
- Households ready to give up gas entirely and drop the standing charge
- Combi owners who can find space for a hot water cylinder
What's included
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
- Heat pump cylinder, outdoor unit and weather compensation controls
- Removal of the gas boiler, flue and any loft tanks
- Capping of the gas pipe at the boiler position where you are giving up gas
Semi-detached and terraced houses in Skipton often have an airing cupboard that can be reused for a heat pump cylinder.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Skipton quote.
Installing heat pumps is zero-rated for VAT across the UK until 31 March 2027. Since 29 May 2025, permitted development in England allows up to two air source heat pumps on a house, each up to 1.5 m³, with no blanket 1 m boundary rule — the installation must still meet the MCS planning standards, including the noise check. Listed buildings, flats and some conservation-area positions need extra consent, which we check at survey.
Guide prices for replacing a gas boiler with a heat pump in Skipton
The ranges below are typical installed prices for homes in North Yorkshire, including VAT. A survey sets the exact figure, because two similar-looking houses in Skipton can need quite different radiators and pipework.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Skipton's winters
On the shortest day Skipton gets only about 7 hours 23 minutes of daylight and the noon sun sits around 13° above the horizon. Northern winters tend to be longer, so a well-designed, efficient system matters more here because it runs for more of the year.
How installation works in Skipton
- Start online with a guide price or call us.
- A home survey in Skipton gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Skipton: questions
How long does a heat pump survey take in Skipton?
A home survey in Skipton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Where would the outdoor unit go on a Skipton house?
Usually at the side or rear, on a level base with space around it for airflow and servicing, away from bedroom windows where possible. The surveyor checks positions at your Skipton home.
How long does installation take in Skipton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Skipton home states the expected time.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.
Is there a grant to replace a gas boiler with a heat pump?
In England and Wales, the Boiler Upgrade Scheme gives £7,500 towards an air-to-water heat pump that replaces a gas boiler, for eligible owners of existing homes. The MCS-certified installer applies to Ofgem and deducts the grant from your quote, and Ofgem contacts you to confirm. Scotland has separate Home Energy Scotland funding, and Northern Ireland has no dedicated homeowner grant at present.