- Area
- Northamptonshire
- Postcode district
- NN8
- Nation
- England
- Guide price
- From £9,500 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Wellingborough
A heat pump suits most Wellingborough homes, but the details decide how efficiently it runs. Our survey looks at insulation, radiators and hot water use room by room.
Installers in Wellingborough take out the old boiler and flue and seal the wall opening as part of the job. If your Wellingborough home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- System or regular boiler homes with an existing airing cupboard
- Households ready to give up gas entirely and drop the standing charge
- Boilers that are old, unreliable or due for replacement
What's included
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Removal of the gas boiler, flue and any loft tanks
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
- Capping of the gas pipe at the boiler position where you are giving up gas
Many gas-heated homes in Wellingborough have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Grants and rules for heat pumps in England
In England the Boiler Upgrade Scheme gives £7,500 towards an air source heat pump (£9,000 if it replaces oil or LPG, from 21 July 2026 to 31 March 2027), and since 28 April 2026 a valid EPC is no longer needed. The grant is applied for by the MCS-certified installer and shown as a deduction on your Wellingborough quote.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Guide prices for replacing a gas boiler with a heat pump in Wellingborough
These are guide prices for Northamptonshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,500–£12,500 | £2,000–£5,000 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,500–£13,500 | £3,000–£6,000 |
| 3 bedroom semi or small detached | 6–9 kW | £12,000–£15,500 | £4,500–£8,000 |
| 4 bedroom detached | 8–12 kW | £14,000–£18,000 | £6,500–£10,500 |
| 5+ bedroom or larger older house | 11–16 kW | £16,500–£22,500 | £9,000–£15,000 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Designing for Wellingborough's winters
On the shortest day Wellingborough gets about 7 hours 41 minutes of daylight, with the noon sun around 14° up. The heating season runs from autumn into spring, so a heat pump that is sized correctly and set up with weather compensation does most of its work in steady, cool conditions.
What happens after you enquire in Wellingborough?
- Send your postcode and a few details, or use the guide price tool.
- A surveyor visits your Wellingborough home, measures every room and checks where the outdoor unit can go.
- You receive a heat loss design and a fixed written quote, with any grant shown where it applies.
- Installers fit the unit, cylinder and any radiator changes, typically over 2–4 days on site.
- The system is commissioned, set up with weather compensation and handed over with the paperwork.
Replacing a gas boiler with a heat pump in Wellingborough: questions
What size heat pump does a Wellingborough home need?
It depends on the heat loss, not the postcode. As a rough guide, a 3 bedroom semi often needs 6–9 kW, but the room-by-room survey sets the actual size for your Wellingborough home.
How long does installation take in Wellingborough?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Wellingborough home states the expected time.
Do I need new radiators for a heat pump in Wellingborough?
Often some, not all. Heat pumps run best at lower water temperatures, so rooms with small radiators may need larger ones. The survey of your Wellingborough home gives a room-by-room list.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
What if my gas boiler is fairly new?
A newer boiler can still be replaced, but the timing is worth weighing. Some owners switch when the boiler needs a major repair; others prefer to plan the change for a convenient time. Across the UK, heat pump installation is zero-rated for VAT until 31 March 2027. A hybrid system, which keeps the boiler alongside a heat pump, is another option, though it is not eligible for the Boiler Upgrade Scheme in England and Wales.