- Area
- South Yorkshire
- Postcode district
- S75
- Nation
- England
- Guide price
- From £9,200 inc VAT
- Survey
- Free for installation enquiries
Before you book: replacing a gas boiler with a heat pump in Darton
Most homes can run on a heat pump if the system is designed properly, and Darton is no different. The key is matching the heat pump and radiators to the home's heat loss.
Rear gardens and side returns in Darton usually offer a sensible spot for the outdoor unit, checked for airflow and neighbours. If your Darton home still cooks on gas, we talk through whether to keep the supply or switch to an induction hob.
Moving from mains gas to a heat pump means finding cylinder space, deciding what happens to the gas supply and comparing running costs on realistic assumptions.
- Households ready to give up gas entirely and drop the standing charge
- Homes in England and Wales eligible for the Boiler Upgrade Scheme
- Combi owners who can find space for a hot water cylinder
What's included
- Commissioning, MCS certificate and grant application in England and Wales where eligible
- Heat pump cylinder, outdoor unit and weather compensation controls
- System flush and radiator upgrades where the design calls for them
- Free survey with heat loss calculation and cylinder siting
- Removal of the gas boiler, flue and any loft tanks
Many gas-heated homes in Darton have a combi boiler in the kitchen, so the survey starts by finding the right place for a cylinder.
Grants and rules for heat pumps in England
Homes in Darton can use the Boiler Upgrade Scheme, which takes £7,500 off the cost of an air source heat pump when it replaces fossil-fuel or electric heating. Replacing oil or LPG heating qualifies for £9,000 for installations from 21 July 2026 to 31 March 2027, and air-to-air systems for £2,500. The MCS-certified installer named in your quote applies for the grant and deducts it from the price.
There is no VAT on installing a heat pump anywhere in the UK until 31 March 2027. In England most houses can have an air source heat pump under permitted development, provided the unit meets the MCS noise and siting standards; the old 1 m boundary limit was removed on 29 May 2025. We flag listed buildings, flats and sensitive conservation-area positions at survey.
Gas boiler to heat pump prices in Darton
These are guide prices for South Yorkshire, installed and including VAT. Your final price is fixed in a written quote after the survey and depends on the heat loss of the house, the radiators that need changing and where the unit goes.
| Home | Typical size | Installed guide price | After £7,500 grant |
|---|---|---|---|
| 1–2 bedroom flat or small terrace | 4–5 kW | £9,200–£12,150 | £1,700–£4,650 |
| 2–3 bedroom terrace or semi | 5–7 kW | £10,200–£13,100 | £2,700–£5,600 |
| 3 bedroom semi or small detached | 6–9 kW | £11,650–£15,050 | £4,150–£7,550 |
| 4 bedroom detached | 8–12 kW | £13,600–£17,450 | £6,100–£9,950 |
| 5+ bedroom or larger older house | 11–16 kW | £16,000–£21,850 | £8,500–£14,350 |
Installed, inc VAT: unit, cylinder, controls, minor pipework and commissioning.
Winter daylight and heating in Darton
Darton sees roughly 7 hours 27 minutes of daylight in December and 17 hours 03 minutes in June. With a longer heating season than the south, the gains from low flow temperatures and good controls add up over the year.
How installation works in Darton
- Start online with a guide price or call us.
- A home survey in Darton gives us the room-by-room heat loss.
- Your written quote sets out the design, the price and the grant position where you live.
- Installation is booked for dates that suit you; most homes take 2–4 days on site.
- After commissioning you get a handover of the controls and settings, plus the certificates.
Replacing a gas boiler with a heat pump in Darton: questions
How soon can you survey a home in Darton?
Survey dates depend on how busy installers are in South Yorkshire. We offer the next available dates when you enquire and confirm them in writing.
How long does installation take in Darton?
Most installations take 2–4 days on site. Jobs with several radiator changes or new pipework take longer, and your quote for a Darton home states the expected time.
How long does a heat pump survey take in Darton?
A home survey in Darton usually takes one to two hours. The surveyor measures every heated room, checks windows, walls and radiators, and looks at where the outdoor unit and cylinder can go.
Can a heat pump replace a combi boiler?
Yes, but you need room for a hot water cylinder, because heat pumps store hot water rather than heating it on demand. Most homes find a space in a cupboard, utility room, garage or under the stairs, and compact or combined indoor units help where space is tight. The survey measures the options first, so you know where everything will go before you accept the quote.
Do I need to replace the cylinder I already have?
Usually, yes. Older cylinders have a small internal coil designed for water from a boiler at around 60–70°C, and they cannot take in heat quickly enough at the lower temperatures a heat pump runs at. A heat pump cylinder has a larger coil. On its own, a cylinder supplied and fitted has a guide price of £1,200–£2,200, installed and including VAT, though it is normally part of the full system price.